Using a Fire Extinguisher: The PASS Method Explained

What does PASS stand for when describing how to use an extinguisher? The acronym PASS stands for Pull, Aim, Squeeze, Sweep, which are the four steps to effectively use a fire extinguisher.

The PASS Method: Pull, Aim, Squeeze, Sweep

When it comes to using a fire extinguisher, remembering the acronym PASS is key. This method outlines the step-by-step process for effectively using an extinguisher to combat a fire.

Pull: The first step in using a fire extinguisher is to pull the pin that locks the extinguisher in place. By pulling the pin, you are preparing the extinguisher for use.

Aim: Next, aim the nozzle of the extinguisher at the base of the fire. It is important to direct the extinguishing agent at the source of the flames to effectively put out the fire.

Squeeze: Once you have aimed the nozzle, squeeze the handle of the extinguisher to release the extinguishing agent. This action will help to disperse the agent onto the fire.

Sweep: Finally, sweep the extinguisher from side to side, covering the entire area of the fire. By sweeping the extinguisher, you can ensure that the fire is fully extinguished.

By following the PASS method, you can effectively use a fire extinguisher to control and put out small fires before they escalate. Remembering these four simple steps can make a significant difference in an emergency situation.

← Keep cool with these tips for your air to air heat pump system Wood treatment level ensuring maximum durability for wood in ground contact →

More Posts: